The application of Wecon hmi in gas burner

Ⅰ Brief introduction

Gas burner valve testing: through this equipment testing,adjust gas burner as soon as possible.

Ⅱ Operating principle

According to the set time delay measurement valve rapid opening and slow opening,measuring whether open the speed of the best results at the same time.

Ⅲ Introduce the program

1.Monitoring screen: this screen is to monitor the rapid stroke actual distance within the set time.

 

2.Rapid feed setting screen: set the upper and lower of rapid feeding and running time.

 

3.Slow feed monitoring screen: monitoring the feed speed of slow feed and setting time.

4.Slow feed setting screen: set the upper and lower of slow feeding and delay time.

 

5. Display screen:displaying the total travel and closing time of valve ,and the total travel,the speed and the time of rapid or slow feed.

Working requirements: by setting rapid or slow feed running time,monitoring rapid or slow feed travel and speed,so to get a better opening results, to make gas burner ignition and combustion can achieve the best effect.

Ⅳ Main points of engineering design

1.Make sure time setting, to monitor measuring values.
2.And then to make sure whether the burner valve opening within the scope of permissible error.
3.Improve the speed of debugging.

This equipment is just a simple test tools, improve the debugging speed, also make the valve adjustment easier.

http://www.we-con.com.cn/en/solution/20140714/204.html